EnviroSept Electronic Air Cleaners

Each EnviroSept comes complete with is own 24 volt power supply and twelve replacement collector pads. The EnviroSept is currently available in thirty-five standard sizes per the following schedule. The EnviroSept is designed to be a direct replacement for an existing filter that may be currently installed in the HVAC system. Our model # are designed to be the approximate size of the filter. Therefore, check the measurements on the filter in your system and compare them to the schedule below. Keep in mind that on the throwaway fiberglass filters the size/model number may be printed on the side. Therefore, if a filter has (20 x 20) printed on the side, the exact measurement should be (19 5/8 x 19 5/8). Look at the schedule below for this size and you will find that the exact size of the EnviroSept model # EAF-2020 is (19 ½ x 19 ½). We are usually within a ¼ inch smaller to allow for the hinges and closure clips.

Replacement collector pads
The collector pads are provided twelve pieces per box. To order your collector pads, refer to the model # on the EnviroSept or the box that unit came in. If you are not sure of the model #, then measure the total exterior dimension of the unit and match it with the schedule below. Note on the schedule that the actual sizes of the collector pads are smaller than the unit itself.

Ordering Instructions
Please e-mail us or call 800-854-5126 for more information on how to order your EnviroSept and the HVAC dealers in your area. All orders placed by 2 PM EST are shipped from our Maryland distribution center that day.